Quality Assurance Laboratory Technician
The Quality Assurance Laboratory Technician has the following roles and
Responsibilities:
o Perform acceptance inspection and testing of all procured components, sub-assemblies and raw materials as required.
o Perform final inspection and acceptance of all customer spare parts orders.
o Complete all applicable forms related to the inspection process.
o Follow all documented procedures and best inspection practices.
o Understand and perform qualifications of received fabrics, materials and other supplies.
o Perform qualification tests (Flame, Tear, Radiant Heat, and Tensile) and generates test results.
o Communicate and coordinate activities and results as needed, with other facilities.
o Perform monthly calibration and ensures data recorded in calibration software.
o Other duties as assigned.
Additional description CONTRIBUTION TO QUALITYAs a member of the Quality Assurance Department, you are expected to lead by example.
Thus, your work quality, preparation for work, work habits, attendance and timeliness shall be subject to strict review.
It is Air Cruisers Company's expectations that you always act in a professional manner, report to work when required, and report to work on time.
QUALIFICATION REQUIREMENTSTo accomplish this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work sometimes involves working near moving or mechanical equipment.
The employee is regularly exposed to fumes and airborne particles and toxic or caustic chemicals.
The noise level in the work environment is usually moderate.
Candidate skills & requirements Education and/or
Experience:
o High School diploma or general education degree (GED)o 6 months to 1 year related experience and/or training; or equivalent combination of education and experience.
Language Skills:
o Ability to read, analyze, and interpret safety rules, operating and maintenance instructions, general business correspondence, technical procedures, procedure manuals and government regulations.
o Ability to write routine reports and correspondence.
o Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Technical Mathematical skills:
o Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
o Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
o Ability to apply concepts of basic algebra and geometry.
Technical Reasoning Ability:
o Ability to define problems, collect data, establish facts and draw valid conclusions.
o Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Knowledge/Skills:
o The ability to review all supplier documentation for completeness and conformance to applicable specifications.
o Shows an aptitude for work with measurement equipment such as verniers, calipers, height gages, pressure gages and other measurement equipment which is used in a receiving inspection environment.
o Shows an aptitude for work dealing with fabrics.
Should have the ability to operate specialized test equipment such as tensile testers, flame cabinets, radiant heat tester, etc.
o Should develop the ability to make adjustments to inspection instructions and inspection sampling levels.
o Have the capability to understand and review supplier Statistical Process Control submittal.
o Have the ability to operate, maintain, and calibrate all Measuring, Test, and Inspection Equipment.
Certificates, Licenses, Registrations o Certified Quality Technician (CQT) is recommended.
Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Most work is conducted from a sitting position, however, both standing and walking are required as well as ability to talk and hear.
The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls.
Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus.
Annual salary tbdJob location Job location North America, United States, New Jersey City (-ies) Wall Township Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required First experience Additional Languages preferred English (Fluent)Salary:
$50 per hour.
Estimated Salary: $20 to $28 per hour based on qualifications.
Responsibilities:
o Perform acceptance inspection and testing of all procured components, sub-assemblies and raw materials as required.
o Perform final inspection and acceptance of all customer spare parts orders.
o Complete all applicable forms related to the inspection process.
o Follow all documented procedures and best inspection practices.
o Understand and perform qualifications of received fabrics, materials and other supplies.
o Perform qualification tests (Flame, Tear, Radiant Heat, and Tensile) and generates test results.
o Communicate and coordinate activities and results as needed, with other facilities.
o Perform monthly calibration and ensures data recorded in calibration software.
o Other duties as assigned.
Additional description CONTRIBUTION TO QUALITYAs a member of the Quality Assurance Department, you are expected to lead by example.
Thus, your work quality, preparation for work, work habits, attendance and timeliness shall be subject to strict review.
It is Air Cruisers Company's expectations that you always act in a professional manner, report to work when required, and report to work on time.
QUALIFICATION REQUIREMENTSTo accomplish this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work EnvironmentThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work sometimes involves working near moving or mechanical equipment.
The employee is regularly exposed to fumes and airborne particles and toxic or caustic chemicals.
The noise level in the work environment is usually moderate.
Candidate skills & requirements Education and/or
Experience:
o High School diploma or general education degree (GED)o 6 months to 1 year related experience and/or training; or equivalent combination of education and experience.
Language Skills:
o Ability to read, analyze, and interpret safety rules, operating and maintenance instructions, general business correspondence, technical procedures, procedure manuals and government regulations.
o Ability to write routine reports and correspondence.
o Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Technical Mathematical skills:
o Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
o Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
o Ability to apply concepts of basic algebra and geometry.
Technical Reasoning Ability:
o Ability to define problems, collect data, establish facts and draw valid conclusions.
o Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Knowledge/Skills:
o The ability to review all supplier documentation for completeness and conformance to applicable specifications.
o Shows an aptitude for work with measurement equipment such as verniers, calipers, height gages, pressure gages and other measurement equipment which is used in a receiving inspection environment.
o Shows an aptitude for work dealing with fabrics.
Should have the ability to operate specialized test equipment such as tensile testers, flame cabinets, radiant heat tester, etc.
o Should develop the ability to make adjustments to inspection instructions and inspection sampling levels.
o Have the capability to understand and review supplier Statistical Process Control submittal.
o Have the ability to operate, maintain, and calibrate all Measuring, Test, and Inspection Equipment.
Certificates, Licenses, Registrations o Certified Quality Technician (CQT) is recommended.
Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Most work is conducted from a sitting position, however, both standing and walking are required as well as ability to talk and hear.
The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls.
Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus.
Annual salary tbdJob location Job location North America, United States, New Jersey City (-ies) Wall Township Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required First experience Additional Languages preferred English (Fluent)Salary:
$50 per hour.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
